(一):
「Drivers and Firmware」
http://ieee80211.sourceforge.net/INSTALL
http://ipw2200.sourceforge.net/INSTALL

(二):
「Wireless-Tools」
ifconfig(8), iwconfig(8), iwspy(8), iwlist(8), iwevent(8),
iwpriv(8), wireless(7).

(三):
If you want to use WPA-PSK+TKIP.. and other
mode, you can choose「WPAsupplicant」

「Wpasupplicant」
less /usr/share/doc/wpasupplicant/README.Debian
less /usr/share/doc/wpasupplicant/examples/wpa_supplicant.conf.gz

「Create Startup Script for Wpasupplicant」
# /etc/default/wpasupplicant
# Useful flags:
# -D Wireless Driver
# -D wext less /usr/share/doc/wpasupplicant/README.Debian
# -i Interface (required, unless specified in config)
# -c Configuration file
# -d Debugging (-dd for more)
# -w ait for interface to come up
ENABLED=1 #<— important!!!
OPTIONS=”-w -i eth1 -D wext -B -c /etc/wpa_supplicant.conf”

「Make sure you have a configuration file」
# Minimal /etc/wpa_supplicant.conf to associate with open
# access points. Please see
# /usr/share/doc/wpasupplicant/examples/wpa_supplicant.conf.gz for more
# complete configuration parameters.
# Also see the other files in /usr/share/doc/wpasupplicant/examples/ for
# specific configuration examples.
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
### Example of basic WPA-PSK secured AP
network={
ssid=”Denny’s Home”
psk=”ABCDEFG”
}

「Make sure you set “ENABLED=1″ to “/etc/init.d/wpasupplicant”」
# insane defaults
OPTIONS=”-Bw” # daemonize and wait for interface
CONFIG=”/etc/wpa_supplicant.conf”
ENABLED=1 #<— important!!!

(四):
Have Fun :-D